|
Find out about our new Equipment Financing option |
 |
|
|
Light model rising blocker to be installed directly onto the road surface, without pit or special infrastructure. Specially designed to control access of existing high security parking areas. |
|
DESCRIPTION |
|
|
Folded and welded steel housing, 2mm thick. |
|
Upper hood with security lock |
|
Lateral door for access to internal mechanism with security lock |
|
Electromechanical assembly comprising: |
|
- 120V motor,
- Life-lubricated speed reduction gearbox with worm screw
- Gearbox driven by pulleys and V-belt
- Balance achieved by built-in traction springs
- Obstacle driven by sprocket-wheels and roller chain
- Limit switches activated by adjustable cams
- Adjustable safety friction clutch regulated by Ferodo disks
|
|
|
Obstacle made of heavy-gauge goffered steel sheet welded on a strong steel profile frame |
|
Step skirt made up of 1.5mm-thick telescopic steel sheets, white enameled with red reflecting stripes |
|
Driving shaft on pillow blocks with crankshaft/rod device ensuring smooth operation and mechanical locking of step when in upper position |
|
Control logic type D1 for control by3-push button box(open - close -stop), |
|
Frame to be fixed on the road surface by means of rawl bolts. |
|
Difference of level must be compensated by two concrete slopes (to be provided by customer). |
|
Red/green traffic light mounted on cabinet. |
|
Emergency crank for manual operation in case of power failure. |
|
OPTIONS AVAILABLE |
|
|
Automatic closing logic type B3 |
|
Logic for two-way automatic closing and one-way automatic opening, type C3 |
|
Vehicle presence detector(s) with detection loop(s), card reader(s), coin acceptor(s), etc. |
|
Additional 3-push button box |
|
Additional two-colour traffic light for bi directional traffic |
|
Goffered steel sheet slopes welded on steel profile frame |
|
Security lock for crank hole |
|
WORK NOT INCLUDED |
|
|
Concrete slopes before and after obstacle |
|
120V Power supply. |
|
Power supply and connection wiring. |
| |
TECHNICAL CHARACTERISTICS |
| |
|
Height of raised obstacle: 350mm |
|
Length of obstacle: 2040-2980mm\6.5-10ft. |
| Motor: 3-phase asynchronous type, 0.25kW 950rpm |
| Power supply: 120V |
| Frequency: 50/60Hz |
| Reduction gearbox: worm-screw type, life-lubricated, |
| ratio of reduction 64:1 |
| Power consumption: in stand-by mode 120W |
| in operation 420W |
| Operational temperature: -25 C to +70 C |
| Mechanical endurance (MCBF): 1.106 cycles |
| Net weight: model 1 = 280kg |
| model 2 = 340kg |
| Operation speed: 3 seconds |
|
